TRAMEX Moisture Meters & Kits

Flooring Master Kit

Flooring Master Kit

The ultimate Tramex kit for pre- & post-application moisture testing of concrete and other floor screeds, wood and wood-based products

Reusable Hygro-i2@ relative humidity probes allow for testing relative humidity, temperature and dew point in the environment

Contains 3 x Hygro-i2@ Relative Humidity Probes.

Contains 25 x Hole Liners

Contains 3 x SAL75 (Calibration Check Salts

Depth of penetration in concrete: (NDT*) approx. 3/4" (20 mm)

• Features

  CMEX II: Measures up to 6.9% moisture content in concrete (NDT*)

  CMEX II: Carbide Method (CM) equivalent scale for concrete.

  MRH III: Accuracy in very low moisture content readings and up to 55% moisture content readings in wood in non-invasive mode (NDT*).

  MRH III: Detects moisture through paint, wall coverings, drywall, ceramic tiles, floor coverings, wood, roof coverings and most building materials.

  CMEX II & MRH III: Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.

  CMEX II & MRH III: 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment.

  CMEX II & MRH IIII: Attaches to a relative humidity Hygro-i2 ® probe for testing of ambient conditions and in situ and hood testing of concrete (hood optional).

• Specification

  Size: 430mm x 345mm x 130mm (16.9" x 13.6" x 5.1")

  Weight: 4kg (8.8lbs)

  Power: 3 x 9 volt PP3 Batteries (included)

  Measuring range - CMEX II:

  Depth of penetration: (NDT*) up to 1." (30mm) (in wood, drywall)

  Wood Non-invasive Mode 5 to 55% (at SG of 0.3)

  Wood Invasive Mode using Pin Probe: 7 to 40%

  Reference scale for building materials: 0 to 100

  Reference scale: (NDT*) 0 to 100

  Relative Humidity (with Hygro-i2 ® probe): 0 to 99%

  Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C / 77°F

  Size: 16.9" x 13.6" x 5.1" (430mm x 345mm x 130mm)

  Weight: 8.8lbs (4kg)

  Power: 3 x 9 volt PP3 Batteries (included)

  Measuring range - MRH III:

  Depth of penetration: (NDT*) up to 1." (30mm) (in wood, drywall)

  Wood Non-invasive Mode 5 to 55% (at SG of 0.3)

  Wood Invasive Mode using Pin Probe: 7 to 40%

  Reference scale for building materials: 0 to 100

  Relative Humidity (with Hygro-i2 ® probe): 0 to 99%

  Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C / 77°F

  Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C / 77°F

  Size: 16.9" x 13.6" x 5.1" (430mm x 345mm x 130mm)

  Weight: 8.8lbs (4kg)

  Power: 3 x 9 volt PP3 Batteries (included)